Nozzle and part of rim and body to left preserved.
Rim nearly flat on top. Practically no outward projection.
Glaze black on rim, nozzle and bottom of interior. Transparent glaze on exterior.
Type 19B ... 525-480 B.C.
One side of nozzle attachment and about half of rim and body preserved.
Rim, rounded on top, slopes sharply inward. Slight projection on exterior. Bottom rises toward center.
Glaze, black on rim and nozzle; ... Ca. 525-480 B.C.
Handle and end of nozzle missing.
Watch shaped body with upper part ribbed. Ring foot. Vertical strap handle. Unpierced lug on one side.
Mold made. Pinkish-gray clay; black glaze.
Type 48A of Agora collection, ... 12 May 1934
The nozzle and part of the rim remain.
Shallow groove around outside of rim. Incised on the upper flat surface of the nozzle the letter K.
Pinkish-buff clay, unglazed except on inside the nozzle.
Type ... 14 May 1934
Part of the bottom and lower nozzle preserved, with letters in relief on the bottom: Λ Ι Ο
Λ Ι C
Gray clay, black glaze.
Type 48A of Agora collection, type XVIII of Corinth collection.
Cf. Agora IV, ... Probably somewhat before 75-50 B.C.
Only a fragment from the top and side is preserved.
The side wall is almost vertical; the rim is broad and flat, rising slightly toward the middle. Around the filling hole it terminates in a depressed ... 1933
Part of a lamp on a high columnar stand, broken off below, and above the base of the lamp.
Cylindrical stand, decorated with three horizontal bands in white paint (west slope decoration).
Glazed black; ... 1934
Mended from many pieces; nozzle, handle and part of rim missing.
Simulated ring foot, watch-shaped body enclosed in vertical rim; vertical strap handle. Cornucopia-shaped knob on one side of upper body ... 15 March 1934
From the upper part of a large round-bodied lamp, with raised ridge, and grooves, around a sunken filling hole.
Double vertical loop handle, with prolonged ends resting on the shoulder.
The two halves ... 7-9 May 1934
Most of one side, handle and end of nozzle missing.
Deep diamond-shaped body, pointed at the back, and probably with vertical strap handle; long nozzle, small round filling hole. Decorated in relief on ... 12 March 1934
