|
|
Open type; the curving sides pinched in at one end to form an unbridged nozzle. No handle. Stem pinched; broken off in the middle.
Light yellowish-green glaze on the inside of the body, and irregularly ... 20 July 1931 |
The edge of the shallow, open body is pinched together in two places to form nozzles; the front part of the body is missing.
Hollow stand, broken at the bottom; attached just below the body of the lamp ... 25 July 1931 |
The left side of the head is preserved, broken all round.
The features are heavy, the cheeks and chin bulging; the mouth is bent down at the corner.
Coarse work. Mold made; hollow. Not colored.
Red clay ... 5 August 1931 |
Fragment of nozzle. Tip and part of one side of nozzle missing.
Rim, sloping downwards towards central opening; narrow; set off from the sides by an unglazed groove.
Unusually large and deep nozzle; flat ... 15 July 1931 |
Nozzle and handle missing.
Ball-shaped body; at the top of the body, where it meets the rim, two shallow grooves. Rounded rim, sloping, set off from body by groove.
Small, fairly high base.
Glazed on the ... 18 July 1931 |
Fragment of nozzle.
Large, rather short, nozzle, triangular, with a narrow flat band extending along the neck and round the edge of the nozzle; large wick hole.
On rim, small bit preserved shows trace ... 20 July 1931 |
Nozzle and handle broken.
Flat rim, slightly depressed.
Double convex body, but without a sharp angle. On the left side of the body, a small unpierced knob.
Nozzle rounded. Vertical band handle.
Low base, ... 21 July 1931 |
Fragment of rim.
Convex rim, with ribs radiating from a small top with two rings round the filling hole; near the outer edge an ornament, dolphin (?).
Vertical band handle, broken away.
Purplish-black ... 31 July 1931 |
|
|
